Analyses temp

Only available in: BSS and BMS

The analyses screen contains the deviations regarding the operation of the blackboxes

Analyses screen

Open analyses screen

The analyses screen can be opened for one or more ships, in the following ways from the the ship overview:

• under menu-item Info → Analyses;
• by right clicking the mouse and choose Analyses from the pop up menu.

After the desired period selection has been entered, the screen will be opened.

Analyses screen content

Depending on fleet, the following data is shown in list view:

Column	Content
Ship	The ship code
Category	The category under which the event falls: - BB Ship state - BB State - BB Reset - BB Memory - BB Enclosure - BB Gps - BB Gsm - BB Sms - BB RTC - BB Power - BB Temperature - BB Channel - BB Alarm - BB Configuration - IWS Processing
Event ID	The event, noted in code
Event	The event, noted in text
Start event	The date and time the event started
End event	The date and time the event ended
Time span	The duration of the event in minutes
Last registration	The date and time of the last registration in which the event occurred
GPS %	The gps quality, noted in percentage
Registrations amount	The number of registrations in which the event occured

Meaning event ID and text

Depending on the fleet, the following information about the events is shown, divided by category.

BB State

Events under the category BB State are related to the software states of the blackbox system:

Event ID	Event	Meaning	Fleet dependent	Bit
13	State fast standby or standby	- "standby fast" event triggered standby registration (without waiting on GPS position information). This can be triggered by openening/closing the blackbox and by changing Namur status (okay / failure). - "standby" interval triggered standby registration (waits maximum 60 secs for GPS position information).		Statusbit 0-1 = 4
14	State off	The blackbox is completely shut down and does not have any functionality. This state is entered when no vessel supply is available and the battery voltage is too low. It can also be entered manually for transport or storage.		Statusbit 0-1 = 3

BB Ship state

Event ID	Event	Meaning	Fleet dependent	Bit
??	Ship state X	A transition to ship state X occured	X
??	Ship state unknown	The ship state is unknown	X

BB Reset

Events under the category BB Reset are related to the cause of the system reboot:

Event ID	Event	Meaning	Fleet dependent
25	Cold reset	The system has been reset after restart or a (temporary) power loss of the vessel and battery supply	X
27	Warm reset	The system has been reset after the watchdog was triggered, a voltage dip, software reset has occurred or at power-up from sleep	X
29	Watchdog reset	The system has been reset after the watchdog was triggered	X
31	Software reset	The system has been reset by the software, which can be triggered manually by service station or maintenance station user and triggered at blackbox software update. This is done to restart the GPS receiver at power-up, when the antenna state is not known	X
33	Low voltage reset	The system has been reset without powering down after a voltage dip in the controller supply	X
35	Deep sleep reset	The system has woken up after sleep. This happens in state "standy", when the vessel supply is absent. Also the first registration where the vessel supply is available after being absent.	X

BB Memory

Events under the category BB Memory are related to the memory storage of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
37	SD card failure	The system cannot read or write to the SD card
39	RAM failure	The system cannot read the settings from the RAM after booting	X

BB Enclosure

Events under the category BB Memory are related to the physical enclosure of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
41	Buzzer active	The buzzer is active, because of an alarm	X
43	Enclosure open	The enclosure of the system is open

BB Gps

Events under the category BB GPS are related to the functioning of the gps of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
46	Gps data invalid	The system couldn't receive gps data, because of a missing or broken gps receiver
48	Gps position invalid	The system didn't receive a valid gps position, because of a missing or broken gps receiver and/or antenna, or incorrect data
50	Gps antenna invalid	The gps antenna has a short or open circuit
53	Gps moving in standby	The gps position has changed more than 0.2 minute	X
55	Gps position jump in state normal	A position jump occured when the system was is state normal, i.e.: the system was on with all the functionallity enabled	X
57	Gps position jump in state fast standby or standby	A position jump occured when the system was in blackbox state fast standby or standby	X
59	Gps position jump in state off	A position jump occured when the system was in state off	X

BB Gsm

Events under the category BB Gsm are related to the functioning of the gsm of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
68	Gsm quality bad	The gsm signal is bad or absent
69	Gsm quality moderate	The gsm signal is between -103 dB and -113 dB
70	Gsm quality reasonable	The gsm signal is between -72 dB and -112 dB
78	Gsm action no receipt	The modem is initialized, which happens after a system power-up, a configuration change and when a connection cannot be established	X	kwk: geen ontvangst is toch geen ontvangst!
79	Gsm action failure	The modem initialization failed	X

BB Sms

Events under the category BB sms are related to the functioning of the text messaging of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
83	Sms action failure	Sending a text message failed, an error response is received	X

BB RTC

Events under the category BB RTC are related to the real time clock of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
84	RTC not oke	A RTC anomaly is detected
87	RTC jump forward	The datetime of a record registered by the blackbox lies after the datetime of the next record
88	RTC jump backward	The datetime of a record registered by the blackbox lies before the datetime of the previous record

BB Power

Events under the category BB Temperature are related to the power supplies in the blackbox system:

Event ID	Event	Meaning	Fleet dependent	bit
90	Vessel supply error	The vessel supply is below 22V or has disappeared		Statusbit 14
100	Internal supply voltage error --> Vessel supply voltage error	The vessel supply voltage has an error value	X	Byte 50 = 255
94	Input voltage error	The power cable is disconnected	X	Statusbit 13
96	Internal supply failure	VCC or other internal supply failure: - V+ charge voltage is lower than 10V - Watchdog voltage is lower than 4.5V - Namur 1/2 voltage is lower than 7.5V (if enabled) - 3v4 voltage is lower than 3.2V - 5V voltage is lower than 4.5V - V+ voltage is lower than 10V - V voltage is higher than -10V	X	Statusbit 16
102	No battery	No battery has been detected	X	Statusbit 37
106	Battery voltage error	The battery voltage has an error value	X	Byte 47 = 255
110	Battery capacity error	The battery capacity has an error value	X	Byte 51 = 255
???	Battery supply error	The battery supply is lower than 11.2 or lower than < 11.7 during battery checking in normal state	X	toevoegen

BB Temperature

Events under the category BB Temperature are related to the temperatures of the power supplies in by the blackbox system:

Event ID	Event	Meaning	Fleet dependent
112	Board temperature alarm	The board temperature is too high: above 60°C	X	Statusbit 27
117	Board temperature error	The board temperature has an error value	X	Byte 53 = 255
119	Battery temperature alarm	The battery temperature is too low (-15°C) or too high (+60°C)	X	Statusbit 28
124	Battery temperature error	The battery temperature has an error value	X	Byte 52 = 255

BB Channel

Events under the category BB Channel are related to the input sensors of by the blackbox system:

Event ID	Event	Meaning	Fleet dependent	Bit
multiple	Analogue input X alarm low	Analogue input X has gone too low according to the set* value	X	Byte 21 & 22 = 1
multiple	Analogue input X alarm high	Analogue input X has gone too high according to the set* value	X	Byte 21 & 22 = 2
150	Pulse input 1 error --> Pulse input 1 failure	Pulse input 1 has a short circuit, a wire break, is not connected or broken	X	Statusbit 30
151	Pulse input 1 missing --> Pulse input 1 error	The pulse input 1 value has an error value	X	Byte 39 - 41 = 16.777.215
154	Pulse input 2 error --> Pulse input 2 failure	Pulse input 2 has a short circuit, a wire break, is not connected or broken	X	Statusbit 31
155	Pulse input 2 missing --> Pulse input 1 error	The pulse input 1 value has an error value	X	Byte 42 - 44 = 16.777.215
158	RPM 1 error	The RPM 1 has a value of 9999.9	X	moet blijven bestaan?
160	RPM 2 error	The RPM 2 has a value of 9999.9	X	moet blijven bestaan?
164	Duty cycle 1 error	Duty cycle 1 value has an error value	X	Byte 45 = 255
168	Duty cycle 2 error	Duty cycle 2 value has an error value	X	Byte 46 = 255
X	Duty cycle 1 deviation	value differ X % compare to avarage. Alleen verbetering indien as meting blijft.	X
X	Duty cycle 2 deviation	value differ X % compare to avarage. Alleen verbetering indien as meting blijft.	X

*Configurable via the configuration of the blackbox.

BB Alarm

Events under the category BB Configuration are related to the alarms that were sent by the blackbox system:

Event ID	Event	Meaning	Fleet dependent	Bit
170	Alarm accepted	An alarm has been manually accepted
172	Configurable alarm 1	Configurable via configuration (not yet available)	X	Statusbit 34
174	Configurable alarm 2	Configurable via configuration (not yet available)	X	Statusbit 35
176	Configurable alarm 3	Configurable via configuration (not yet available)	X	Statusbit 36

BB Configuration

Events under the category BB Configuration are related to the configuration of the blackbox system:

Event ID	Event	Meaning	Fleet dependent	Bit
180	Default configuration loaded	The default configuration parameters are loaded into the system after a configuration or SD card failure during configuration		Statusbit 8

IWS Processing

Event ID	Event	Meaning	Fleet dependent	Bit
11	Registration gap	A registration is missing
91	Vessel supply voltage invalid --> Vessel supply voltage out of range	The vessel supply has an out of range value: lower than 15V or higher than 40V	X	Byte 50 = >250 && <255
97	Internal supply voltage invalid --> Charge supply voltage out of range	The charge supply has has an out of range value: lower than 0V or higher than 25V	X	berekend in c# obv byte 49 (charge voltage) KWK: waarde ligt buiten gedefinieerde range, dit wordt neem ik aan ook in verwerkingslog gemeld
103	Battery voltage invalid --> Battery voltage out of range	The battery supply has an out of range value: lower than 0V or higher than 25V	X	Byte 47 = >250 && <255
107	Battery capacity invalid --> Battery capacity out of range	The battery capacity has an invalid value: lower than 0% or higher than 100%	X	Byte 51 = >201 && <254
114	Board temperature too low	The board temperature is below -15°C	X	Byte 53 < -15
115	Board temperature too high	The board temperature is above 60°C	X	byte 53 > +60
115	Board temperature invalid --> Board temperature out of range	The board temperature is out of range: more than 100°C	X	byte 53 >240 && <255
121	Battery temperature too low	The battery temperature is below -15°C	X	Byte 52 < -15
122	Battery temperature too high	The battery temperature is above 60°C	X	Byte 52 > +60
115	Battery temperature invalid --> Battery temperature out of range	The battery temperature is out of range more than 100°C	X	Byte 52 >240 && <255
151	Pulse input 1 out of range	The pulse input value is out of range: more than 10.000.000	X	Byte 39 - 41 >10.000.000 && <16.777.215	toevoegen?
151	Pulse input 2 out of range	The pulse input value is out of range: more than 10.000.000	X	Byte 42 - 44 > 10.000.000 && <16.777.215	toevoegen?
161	Duty cycle 1 invalid --> Duty cycle 1 out of range	Duty cycle 1 has gone too low (below 0%) or too high (above 25%)	X	Byte 45 >250 && <255
165	Duty cycle 2 invalid --> Duty cycle 2 out of range	Duty cycle 2 as gone too low (below 0%) or too high (above 25%)	X	Byte 46 >250 && <255
181	Ship status unknown	The ship status couldn't be determined	X
183	SOG status unknown	The speed over ground status couldn't be determined	X
185	TP status unknown	The turbo pressure status couldn't be determined	X

Weekly summary

under construction