Release notes v2.17.0.1: Difference between revisions

Revision as of 06:55, 20 June 2023

The Configuration screen:
- The default sorting of the calibrations is from new to old, based on the ' active from' date;
- The graphic display is of the screen where you can add, edit and upload a configuration is changed: the general overview is divided in categories, all the options have clear names and some checks are added to make sure only correct values can be filled in.
- The ship code can't be adjusted anymore in the configuration;
- During the sending of a configuration the status of the action is show.
In the Monitoring screen:
- Configuration register info has been added;
- Monitoring by default stops after 15 minutes. The timeout can be changed in Station settings.

In the TP weekly overview screen ceel with a value above 5 are red;
When adding a new Calibration screen, the values of 'Max RPM fish' and ' Max RPM sail' are automatically copied and filled in from the last calibration;

In the Calibration screen:
- A check has been added to make sure that the period date is equal the calibration measurement date;
- An error message in is clarified;
In the Registration data chart the options to view the 'battery supply', 'charge supply' and 'external supply' are added;

@@ Line 10: / Line 10: @@
 == Fixed bugs ==
-* In the [[Analyses|Analyses screen]]:
 * In the [[Turbo_pressure_and_RPM#TP_check_weekly_overview_screen|TP weekly overview screen]] ceel with a value above 5 are red;
 * When adding a new [[Calibrations|Calibration screen]], the values of 'Max RPM fish' and ' Max RPM sail' are automatically copied and filled in from the last calibration;