Notification settings: Difference between revisions

From Blackbox stations
Jump to navigation Jump to search
mNo edit summary
 
Line 2: Line 2:
In the notification settings it is possible to set for various notifications in which case an e-mail should be sent as a result of the analyses. The different messages are described here.
In the notification settings it is possible to set for various notifications in which case an e-mail should be sent as a result of the analyses. The different messages are described here.


= Open notification settings =
== Open notification settings ==
The screen can be opened from the [[ship overview| ship overview screen]] via '''Edit''' → '''Notification settings'''.
The screen can be opened from the [[ship overview| ship overview screen]] via '''Edit''' → '''Notification settings'''.


= Editing the notification settings =
== Editing the notification settings ==
Depending on the fleet, the duration and percentage of the following settings can be adjusted:
Depending on the fleet, the duration and percentage of the following settings can be adjusted:


Line 51: Line 51:
  Note: A notification is sent a maximum of once a day, to avoid sending many e-mails.
  Note: A notification is sent a maximum of once a day, to avoid sending many e-mails.


= Set receiver =
== Set receiver ==
In [[receiver settings]] you can specify who should receive the e-mails.
In [[receiver settings]] you can specify who should receive the e-mails.

Latest revision as of 06:47, 24 July 2023

Only available in: BSS and BMS

In the notification settings it is possible to set for various notifications in which case an e-mail should be sent as a result of the analyses. The different messages are described here.

Open notification settings

The screen can be opened from the ship overview screen via Edit → Notification settings.

Editing the notification settings

Depending on the fleet, the duration and percentage of the following settings can be adjusted:

Description setting Meaning Fleet dependent
GPS quality bad Setting for the gps signal 'bad', i.e.: the signal is bad or absent
GPS antenna failure Setting for an antenna error
Gps data failure Setting for an error in the gps data
TP error Setting for a turbo pressure error
X
TP status unknown 1 Setting 1 for unknown turbo pressure status
X
TP status unknown 2 Setting 2 for an unknown turbo pressure status
X
RPM error Setting for a RPM error
X
Duty cycle error Setting a duty cycle error
X
Ship state unknown 1 Setting 1 for ship status unknown
Ship state unknown 2 Setting 2 for ship status unknown
TP error while fishing/sailing Setting for a turbo pressure error during fishing or sailing
X
RPM error while fishing/sailing Setting for a RPM error during fishing or sailing
X
Duty cycle error while fishing/sailing Setting for a duty cycle error during fishing or sailing
X
All analogue inputs disabled Setting for disabled analogue inputs
X

To receive an e-mail about a report, the following information must be entered:

  • Duration: the length of time in which the notification takes place.
  • Percentage: the percentage of registrations in which the notification at least occurred.

After closing with OK the changes are saved and used.

After closing the screen with X or Cancel, the changes are not saved and used.

Note: A notification is sent a maximum of once a day, to avoid sending many e-mails.

Set receiver

In receiver settings you can specify who should receive the e-mails.