General usage screens

General actions

Refresh screen

The data in the open screen can be refreshed in the following ways:

• View → Refresh;
• with the f5 hotkey.

Select period

When opening various screens, a window may appear in which you can enter the period for which you want to see the relevant data: Bestand:Periodeselectie.jpg

The start and end date time can be adjusted in two ways:

• by typing the desired date and time in the field. By clicking on the right or left arrow on the keyboard, you can navigate within the period and selection boxes.
• by clicking the calendar icon and selecting a date.

After clicking on OK the screen is opened and the data of the chosen period is shown.

After closing the screen with X or Cancel the screen will not open and you will return to the screen from where you started the action.

Close screen

You can close an open screen in the following ways:

• File → Close;
• click on the X at the top right.

In general, any changes made when closing the screen will not be saved.

Quit application

You can close the application from the ship overview screen in the following ways:

• File → Exit;
• click on the X at the top right.

All running processes are terminated when the application is closed, with the exception of automatic data collection from black boxes.

Use of lists

Depending on the station type and/or the available licenses, the following screens are available in list view:

• the ship overview screen in list view
• the registration screen
• the configurations screen
• the deviations screen
• the status times screens
• the analysis screen
• the areas screen
• the calibration screen
• the turbo pressure and speed screen
• the turbo pressure status check screen
• the TP check weekly overview screen
• the sms screen
• the sms history screen

Change the layout of the columns

The layout and display of columns can be adjusted to your preferences. The changes are retained after closing the screen and the application.

Text display column headers

Under View the options 'Horizontal view' and 'Vertical view' are available. The text in the column header will either be displayed horizontally or vertically.

Adjust column width

The column width of one column can be adjusted by hovering over the right edge of the column and dragging it. To set the appropriate column's width automatically, right-click on the column → Best Fit. Automatically setting the width of all column headers can be done by right-clicking on a column →Best Fit (all columns).

Move columns

Columns can be moved among themselves by clicking and dragging them to the desired position.

Hide columns

Columns can be hidden by right clicking on the column and choosing Hide this column in the pop-up menu. The hidden columns can be made visible again by right clicking on one of the column headings and choosing Column chooser. A window appears at the bottom right in which the desired column can be made visible by double clicking on it or dragging it to the desired position in the list.

Display list data

The data in a list can be calculated, filtered, grouped and sorted in various ways.

Select data

A single row can be selected by clicking on it. In some lists, multiple rows can be selected. This can be done in two ways:”

• by holding the Ctrl key and clicking multiple rows individually
• by holding the Shift key and clicking on two rows. The intermediate rows are selected.

Sort data

Sorting a list can be done in the following ways:

• By clicking on the column header of the field to be sorted, after which an arrow pointing upwards is visible in the column header and the column is automatically sorted in ascending order. Clicking the up arrow will sort in descending order.
• Right click on the column header and select Sort ascending' or Sort descending from the pop up menu.

If multiple sorts has to be applied, the Shift key must be held when clicking on the relevant column headings.

The sorting of one column can be removed by right clicking on the relevant column header and choose Clear sorting. The sorting of all columns can be removed by right clicking on any column heading and choose Clear all sorting.

Filtering data

Filtering list data can be done by applying:

• a column filter: a simple or complex filter on a single column;
• the autofilter row: a more complex filter on one or more columns;
• the filter editor: a more complex filter on one or more columns;

If one or more filters are active, this is shown at the bottom of the relevant screen. By clicking on Edit filter right at the bottom of the screen, the Filter Editor is opened and the filtering can be adjusted.

A filtering of one column header can be removed in several ways:

• by clicking on the filter icon of the relevant column and choosing Clear Filter in the window, or by slecting the checkbox All.
• by right clicking on the filtered column header and choosing Clear Filter.
• by removing the value from the autofilter row.

Filtering of multiple column headings can be disabled by unchecking the checkbox at the bottom left of the screen, or removed completely by clicking the cross next to it. Bestand:Filter editor onderin.jpg

After closing the screen and the application, the filter settings are saved.

Column filter

Data in each column can be filtered by hovering the mouse cursor over the column header and clicking on the filter icon that becomes visible: Bestand:Filter icoon.jpg. Depending on the contents of a column, a window appears in which you can filter by value, text and/or date. After clicking the checkbox of the desired value on which to filter, the window is closed and the filtered values ​​are visible in the list.

A more complex filter can be applied to columns containing text by clicking the filter icon → Text Filters → Custom Filter.

eventueel plaatjes?

Auto Filter Row

The auto filter row is shown by right clicking on a column header and choosing Show auto filter row. A row will then appear above the column headings in which the values ​​can be entered directly on which to filter. Depending on the contents of a column, you can filter by value, text or date. An entered value is immediately applied in the list.

The auto filter row is hidden by right clicking on a column header and choosing Hide auto filter row.

Filter Editor

The filter editor can be opened by right clicking on a column heading → Filter Editor. The following screen will open:

To apply the set filtering directly and keep the Filter Editor open, click on Apply. If you want to close the Filter Editor, you can click on OK. The filtering is applied and you are returned to the original screen. After closing the screen with X or Cancel, the set filters are not applied and you return to the original screen.

Grouping data

Grouping data in a column can be done in two ways:

• drag the relevant column header to the grouping box above it;
• go to the column header, right click and select Group By This Column.

By doing this for multiple column headers, you can group data of multiple columns. To change the order of the grouping, the relevant column can be dragged to a different position.

The grouping can be removed by column by:

• drag the column header back to the list view at the desired location;
• hover over the column header in the grouping box, right click and select UnGroup.

All groupings can be removed at once by right clicking on the grouping box and selecting Clear Grouping.

Column Calculations

If under View → Column calculations is checked, there will be a light gray bar below the list. A calculation can be switched on and off by clicking the right mouse button under a column in the gray bar. If there is already a calculation, a new calculation can be added via the item 'Add new summary'.

Depending on the type of data in the column, the following calculations can be chosen:

Calculation	Meaning
sum	adds numbers
Min	shows the minimum value of the data
Max	shows the maximum value of the data
Count	shows the number of lines
Average	shows the average value of the data
None	disables the selected column calculation
Clear summary items	disables all calculations for that column at once

If there is a calculation, one of the following modes can be selected via Mode:

• All rows: the calculation takes place over the entire column;
• Selection: the calculation is done over a chosen selection (see select data);
• Mixed: the calculation is done over a chosen selection if at least one row is selected, otherwise the calculation is done over the entire column.

Search

The search function is activated by right clicking on a column header and selecting Show Find Panel. An input field for a search term appears at the top left.

Deactivating the search function is done by right clicking on a column header and choose Hide Find Panel.

Using the charts

Available in: service station and depending on license

Depending on available licenses, different graphs are available in the services station: standard graphs and the possibility to compose your own graph from a list view.

Open standard chart

The following standard charts are available by default in the service station:

• the registration data chart
• the curve chart (under license)
• the status chart (under license)

Custom chart

Depending on the type of station and/or the licenses available, a custom chart can be created from the following screens:

• the registration screen
• deviations screen
• the status times screens
• areas screen
• the turbo pressure and speed screen
• the turbo pressure status check screen

Create custom chart

To create a chart yourself, click on the menu item Tools → Chart view → Custom in the relevant screen. The following screen opens:

The possible data that can be plotted on the graph are listed under 'Columns' and are based on the screen from which the graph is created. These can be placed individually under the X- or Y-axis by clicking on the line and dragging it to the white area below the X- or Y-axis. The lines can be placed back separately under 'Columns' to not show them in the graph.

Only the date-time can be plotted on the X-axis. The rest of the data can be plotted separately on the Y-axis.

After closing with OK the graph is generated and opened in a new screen.

After closing the window with X no graph is generated and you return to the previous screen.

Preset custom chart

If you wish to re-use a graph you created yourself, a preset can be made.

Create preset chart

To save a chart for reuse, click Add in the chart selection window. A small window opens in which a name for the chart can be entered. After clicking on OK the window is closed and the chosen name is under 'Preset'. After closing the window with X or Cancel the name is not added. //plaatje

From here you can build the chart by placing columns under the X-axis and Y-axis.

After closing with OK the graph is saved under the chosen preset name and opened in a new screen. After closing the window with X, the graph is not generated and saved. You return to the previous screen.

Open preset chart

To open a saved chart, click on the menu item Tools → Graph view → Custom in the relevant screen. Under 'Preset', the desired graph can be selected via the drop-down menu.

Edit preset graph

A preset graph can be changed by selecting the appropriate preset in the graph selection window. Lines can be added or removed directly under the axes. After clicking on OK the changes are saved and the graph opens in a new screen.

Delete preset graph

A preset is permanently deleted by selecting the preset concerned and clicking on Delete.

Zoom graph in and out

You can zoom in on a chart in the following ways:

1. Press Shift → the mouse cursor changes to Bestand:Inzoomen grafiek.png
2. click on the place graph that needs to be zoomed in and click the left mouse button. This causes the graph to zoom in three times or
3. hold down the left mouse button and select a region in the graph to be zoomed in. After releasing the mouse button, the selected region is zoomed in:

You can zoom out a chart in the following ways:

1. Press Alt → the mouse cursor changes to Bestand:Uitzoomen grafiek.png
2. click on the place graph that needs to be zoomed out and click the left mouse button. This will zoom out the graph three times.

To go to the previous zoom level, you can type Ctrl + Z.

If it is not possible to zoom in or out any further, there is no + or – in the icon.

Scrolling in a chart

When the graph does not fit completely in the screen after zooming in, you can scroll through the graph in several ways:

• click with the left mouse button on the graph. The mouse pointer changes from Bestand:Hand open.png to Bestand:Hand gesloten.png. Hold down the left mouse button and move in the desired direction.
• click on the scroll bar at the bottom of the graph to move left or right
• use Ctrl + arrow key (up, down, left, right) to move in the desired direction.

Change chart type

By default, a chart is set as a line chart. At the bottom left of the screen this can be converted to a point graph by clicking on Point: Bestand:Lijn en punt grafiek.jpg

Export chart

See Export Chart for more information about exporting a chart.