Registrations

The registration screen contains the registrations retrieved from the black boxes.

Open registration screen

The registration screen can be opened for one or more ships, in the following ways in both the presentation and services station:

• From the ship overview → Info → Registrations;
• From the deviations screen → Info → Registrations.

In the service station the registration screen can also be opened for one ship, by right clicking the mouse in the ship overview and choose Registrations from the pop up menu.

After the desired period selection has been entered, the registration screen will be opened.

Registration screen content

Depending on the fleet, available licenses and/or user, the following information about the registrations is shown in list view:

Column	Content	Available in BPS	Available in BSS	Available in BMS	Fleet/User Dependent
Ship	The ship code	X	X	X
Datetime registration	The date and time of the registration	X	X	X
Datetime black box	The date and time registered in the black box		X	X
Next reg	If the next registration is missing or not: - : next registration is missing - empty cell: next registration is available	X	X	X
Previous reg	If the prevoius registration is missing or not: - : previous registration is missing - empty cell: previous registration is available	X	X	X
Delta	The time difference between the Datetime registration and Datetime black box: - 0: no difference - -1: 1 second difference		X	X
Incidental registration			X	X
Registration interval			X	X
Missing interval registration			X	X
Expected interval to next registration			X	X
Latitude	Latitude of the position in [G]G MM.MMMMM N/S	X	X
Longitude	Longitude of the position in [GG]G MM.MMMMM E/W	X	X
Speed	Speed ​​(SOG) in knots	X	X
Gps quality code	Quality of the gps in code, see Gps quality code and text		X	X
Gps quality	Quality of the gps, see Gps quality code and text		X	X
Missing GPS		X
Ship status code	(Calculated) Status of the ship in code, see Ship status code and text	X	X	X
Ship Status	(calculated) Status of the ship, see Ship status code and text	X	X	X
BB ship state code			X	X
BB state code	State of the black box system in code, see BB state code and text		X	X
BB state	State of the black box system, see BB state code and text		X	X
SOG status code	(Calculated) Speed over ground status in code, see Ship status code and text				X
SOG status	(Calculated) Speed over ground status, see Ship status code and text				X
COG status code					X
COG status					X
Battery supply	Voltage of the battery supply, noted in V. - Minimum value: 0.1V - Maximum value: 25.0V		X	X
Charge supply	Voltage of the charge supply, noted in V - Minimum value: 0.1V - Maximum value: 25.0V		X	X
External supply	Voltage of the external/vessel supply, noted in V - Minimum value: 15V - Maximum value: 40.0V		X	X
Turbo pressure					X
TP status code					X
Turbo pressure status					X
Shaft power					X
PPstatus 1/2					X
Sea status code					X
Sea status					X
Sea area					X
N2000 area					X
Fish activity status code					X
Fish activity status					X
Engine check					X
Gsm action	Action of the gsm, possible actions are: - Data request: black box received a data request - Paramaters changed: the parameters have changed - Monitor mode: monitor mode is active - Software update: software is updated - Command received: black box received a command - Modem initialization: modem is initialized - Modem failure: modem is not working		X	X
Gsm quality code	Quality of the gsm connection in code, see Gsm quality code and text		X	X
Gsm quality	Quality of the gsm connection, see Gsm quality code and text		X	X
Sms action	Action of the sms, possible actions are: - Sms sending: a sms is send - Service failure: the service number initialization failed - Sms failure: sending an sms has failed		X	X
Board temperature	Temperature of the board supply, noted in °C - Minimum value: -20°C - Maximum value: +100°C		X	X
Battery capacity	Capacity of the battery supply, noted in % - Minimum value: 0% - Maximum value: 100%		X	X
Battery temperature	Temperature of the battery supply, noted in °C - Minimum value: -20°C - Maximum value: +100°C		X	X
Battery current	Charge current of the battery supply, noted in mA - Minimum value: -1280mA - Maximum value: 1270mA		X	X
Alarm	If an alarm occured: - : an alarm occured, see column Alarm notification - empty cell: no alarm occured		X	X
Alarm notification	Type of alarm that occured, see Alarms		X	X
RPM ​​1/2			X
Calculated TP fishing					X
Calculated TP sailing					X
TP fishing difference					X
TP sailing difference					X
Calculated SP fishing					X
Calculated SP sailing					X
SPFDiff					X
SPSDiff					X
Calling Index			X	X
Duty cycle 1/2					X
Pulse input 1/2					X
Analogue input 1 to X			X	X

Gps quality code and text

Gps quality code	Meaning in text
0	No gps data available
1	No valid position available
2	2D fix without D
3	3D fix without D
4	2D fix with D or PPS
5	3D fix with D or PPS
6	Gps antenna has an open circuit
7	Gps antenna has a short circuit

Ship status code and text

Ship status code	Meaning in text
0	Unknown
1	Stationary
2	Fishing
3	Sailing
4	Transition
5	Undetermined
6	Possible fishing

BB state code and text

BB state code	Meaning in text
0	Normal
1	Standby
2	Off
3	Fast standby

SOG status code and text

SOG status code	Meaning in text
0	Unknown
1	Stationary
2	Fishing
3	Sailing
4	Transition

Gsm quality code and text

Gsm quality code	Meaning in text
0	Bad
1	Moderate
2	Reasonable
3	Good

Alarms

Alarm	Occurance	Fleet/user dependant
Cold reset
Warm reset
Watchdog reset
Software reset
Low voltage reset
Deep sleep reset
Default configuration loaded
New configuration changed
No gps data
Gps bad signal
Gps antenna failure
Power failure
Ext suupply low
Battery supply low
Internal supply failure
SD card error
Sleep RAM memory error
RTC wake-up error
Enclosure open
Accept input
Modem failure
Sms failure
Internal temp too high
Battery temp too high
Buzzer on
Namur 1/2 error
Calibration		X
Moving during standby
Special 1
Special 2
Special 3
No battery detected
External supply error
Battery capacity error
Battery temperature error
Battery current error
Battery supply error
Board temperature error
Charge supply error
Analogue input 1 to X low alarm		X

Retrieve registrations

Registrations are automatically retrieved if the ship's end date has been entered and has not yet expired. When a ship is behind with registrations, it is possible to retrieve them manually.

Retrieve registrations manually

Retrieving registrations manually is currently possible for one ship at a time. To retrieve registrations for a specific ship, click on the ship in the ship overview screen and click Retrieve registrations. The following screen opens, in which the statusses of the processes are shown:

If a connection can be made with the black box, the binairy data will be retrieved directly from the black box, from the last registration date stated under the column 'Last registration'. The registrations are automatically converted into usable data after retrieval (ProcessRegistrations). Finally, the necessary calculations on the data are performed (PostProcessRegistrations).

When the calculations are complete, you can click OK to close the window and return to the ship overview. If you want to cancel the export in the meantime, click on Cancel. The registrations will be retrieved, processed and/or postprocessed up to the point of cancellation.

Retrieve registrations (period)

User dependent.

Under construction

Recalculate registrations

Recalculate registrations manually is currently possible for one ship at a time. To recalculate registrations for a specific ship, click on the ship in the ship overview screen and click Recalculate registrations. After the desired period selection has been entered, the following screen opens, in which the statusses of the processes are shown:

The binairy data of the registrations will be converted into usable data (ProcessRegistrations) and the necessary calculations on the data are performed (PostProcessRegistrations).

When the calculations are complete, you can click OK to close the window and return to the ship overview. If you want to cancel the export in the meantime, click on Cancel. The registrations will be processed and/or postprocessed up to the point of cancellation.

Other actions

From the registration screen, AIS tracking can be accessed, as well as the following black box actions:

• Reset a black box;
• Monitor a black box;
• Upload software to a black box.