Analyses temp

Only available in: BSS and BMS

The analyses screen contains the deviations regarding the operation of the black boxes

Open analyses screen

The analyses screen can be opened for one or more ships, in the following ways from the the ship overview:

• under menu-item Info → Analyses;
• by right clicking the mouse and choose Analyses from the pop up menu.

After the desired period selection has been entered, the screen will be opened.

Analyses screen content

Depending on fleet, the following data is shown in list view:

Column	Content
Ship	The ship code
Category	The category under which the event falls: - BB Base - BB State - BB Reset - BB Memory - BB Enclosure - BB Gps - BB Gsm - BB Sms - BB RTC - BB Power - BB Temperature - BB Channel - BB Alarm - BB Configuration - IWS Processing
Event ID	The event, noted in code
Event	The event, noted in text
Start event	The date and time the event started
End event	The date and time the event ended
Time span	The duration of the event in minutes
Last registration	The date and time of the last registration in which the event occurred
GPS %	The gps quality, noted in percentage
Registrations amount	The number of registrations in which the event occured

Meaning event ID and text

Depending on the fleet, the following information about the events is shown, divided by category.

BB Base

Event ID	Event	Meaning	Fleet dependent
11	Registration gap	A registration is missing

BB State

Events under the category BB State are related to the software states of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
13	State fast standby or standby	- standby fast is active after power-up when the reset cause is (deep) sleep wake-up and the logging time is not elapsed - standby is active after power-up when the reset cause is (deep) sleep wake-up and the logging interval time is elapsed
14	State off	The blackbox is completely shut down and does not have any functionality. This state is entered when no vessel supply is available and the battery voltage is too low.

BB Reset

Events under the category BB Reset are related to the cause of the system reboot:

Event ID	Event	Meaning	Fleet dependent
25	Cold reset	The system has been reset after restart or a (temporary) power loss of the vessel and battery supply	X
27	Warm reset	The system has been reset after the watchdog was triggered, a voltage dip, software reset has occurred or at power-up from sleep	X
29	Watchdog reset	The system has been reset after the watchdog was triggered	X
31	Software reset	The system has been reset by the software. This is done to restart the GPS receiver at power-up, when the antenna state is not known	X
33	Low voltage reset	The system has been reset without powering down after a voltage dip	X
35	Deep sleep reset	The system has woken up after the ship supply was absent	X

BB Memory

Events under the category BB Memory are related to the memory storage of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
37	SD card failure	The system cannot read or write to the SD card
39	RAM failure	The system cannot read the settings from the RAM after booting	X

BB Enclosure

Events under the category BB Memory are related to the physical enclosure of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
41	Buzzer active	The buzzer is active, because of an alarm	X
43	Enclosure open	The enclosure of the system is open

BB Gps

Events under the category BB GPS are related to the functioning of the gps of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
46	Gps data invalid	The system couldn't receive gps data, because of a missing or broken gps receiver
48	Gps position invalid	The system didn't receive a valid gps position, because of a missing or broken gps receiver and/or antenna, or incorrect data
50	Gps antenna invalid	The gps antenna has a short or open circuit
53	Gps moving in standby	The gps position has changed more then 0.1 minute	X
55	Gps position jump in state normal	A position jump occured when the system was is state normal, i.e.: the system was on with all the functionallity enabled	X
57	Gps position jump in state fast standby or standby	A position jump occured when the system was in blackbox state fast standby or standby	X
59	Gps position jump in state off	A position jump occured when the system was in state off	X

BB Gsm

Events under the category BB Gsm are related to the functioning of the gsm of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
68	Gsm quality bad	There is no gsm signal available
69	Gsm quality moderate	The gsm signal is between -103 dB and -113 dB
70	Gsm quality reasonable	The gsm signal is between -72 dB and -112 dB
78	Gsm action no receipt	The modem is initialized, which happens after a system startup, a configuration change and when a connection cannot be established	X
79	Gsm action failure	The modem initialization failed	X

BB Sms

Events under the category BB sms are related to the functioning of the text messaging of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
83	Sms action failure	Sending a text message failed, an error response is received	X

BB RTC

Events under the category BB RTC are related to the real time clock of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
84	RTC not oke	A RTC anomaly is detected
87	RTC jump forward	The datetime of a record registered by the blackbox lies after the datetime of the next record
88	RTC jump backward	The datetime of a record registered by the blackbox lies before the datetime of the previous record

BB Power

Events under the category BB Temperature are related to the power supplies in by the blackbox system:

Event ID	Event	Meaning	Fleet dependent
112	Power input failure	The vessel supply is below 22V or has disappeared
114	Power input voltage invalid	The vessel supply has an invalid value: lower than 0V or higher than 40V	X
115	Power input voltage error	The power cable is disconnected	X
112	Power supply failure	VCC or other internal supply failure: - V+ charge voltage is lower than 10V - Watchdog voltage is lower than 4.5V - Namur 1/2 voltage is lower than 7.5V (if enabled) - 3v4 voltage is lower than 3.2V - 5V voltage is lower than 4.5V - V+ voltage is lower than 10V - V voltage is higher than -10V	X
114	Power supply voltage invalid	The internal supply has an invalid value: lower than 0V or higher than 25V	X
115	Power supply voltage error	foutwaarde 255	X
112	Power battery failure	No battery has been detected	X
114	Power battery voltage invalid	The battery supply has an invalid value: lower than 0V or higher than 25V	X
115	Power battery voltage error	foutwaarde 255	X
114	Power battery capacity invalid	The battery capacity has an invalid value: lower than 0% or higher than 100%	X
115	Power battery capacity error	foutwaarde 255	X

BB Temperature

Events under the category BB Temperature are related to the temperatures of the power supplies in by the blackbox system:

Event ID	Event	Meaning	Fleet dependent
112	Board temperature too low	The board temperature is below -15°C	X
114	Board temperature too high	The board temperature is above 60°C	X
115	Board temperature error	foutwaarde 255	X
119	Board temperature alarm	IntTempAlrm = RawReader.MSB.ToBoolean(binRegistration.BinaryRegistration[15], 3); --> bit 27: to high (> 60°C)?	X
112	Battery temperature too low	The battery temperature is below -15°C	X
114	Battery temperature too high	The battery temperature is above 60°C	X
115	Battery temperature error	foutwaarde 255	X
119	Battery temperature alarm	BatTempAlrm = RawReader.MSB.ToBoolean(binRegistration.BinaryRegistration[15], 4); --> bit 28: to high (> 60°C or < -15°C)?	X

BB Channel

Events under the category BB Channel are related to the input sensors of by the blackbox system:

Event ID	Event	Meaning	Fleet dependent
multiple	Analogue input X alarm low	Analogue input X has gone too low according to the set* value	X
multiple	Analogue input X alarm high	Analogue input X has gone too high according to the set* value	X
150	Pulse input 1 error	Pulse input 1 has a short circuit, a wire break, is not connected or broken	X
151	Pulse input 1 missing	No valid value for pulse input 1 has been registered	X
154	Pulse input 2 error	Pulse input 2 has a short circuit, a wire break, is not connected or broken	X
155	Pulse input 2 missing	No valid value for pulse input 2 has been registered	X
158	RPM 1 error		X
160	RPM 2 error		X
174	Duty cycle 1 invalid	Duty cycle 1 has gone too high (above 25%) or too low (below 0%)	X
174	Duty cycle 1 error		X
174	Duty cycle 2 invalid	Duty cycle 2 has gone too high (above 25%) or too low (below 0%)	X
174	Duty cycle 2 error		X

*Configurable via the configuration of the black box.

BB Alarm

Events under the category BB Configuration are related to the alarms that were sent by the blackbox system:

Event ID	Event	Meaning	Fleet dependent
170	Alarm accepted	An alarm has been manually accepted
172	Configurable alarm 1	Configurable via configuration (not yet available)	X
174	Configurable alarm 2	Configurable via configuration (not yet available)	X
176	Configurable alarm 3	Configurable via configuration (not yet available)	X

BB Configuration

Events under the category BB Configuration are related to the configuration of the blackbox system:

Event ID	Event	Meaning	Fleet dependent
180	Default configuration loaded	The default configuration parameters are loaded into the system after a configuration or SD card failure during configuration

IWS Processing

Event ID	Event	Meaning	Fleet dependent
181	Ship status unknown	The ship status couldn't be determined	X
183	SOG status unknown	The speed over ground status couldn't be determined	X
185	TP status unknown	The turbo pressure status couldn't be determined	X