Notification settings
In the notification settings it is possible to set for various notifications in which case an e-mail should be sent as a result of the analyses. The different messages are described here.
Open notification settings
The screen can be opened from the ship overview screen via Edit → Notification settings.
Editing the notification settings
Depending on the fleet. the duration and percentage of the following settings can be adjusted:
| Description setting | Meaning | Fleet dependent |
|---|---|---|
| Gps quality | Poor GPS quality setting | |
| Gps failure | Setting for an error in the gps | |
| Pulse input missing | Pulse input missing setting | X
|
| TP status unknown 1 | Setting 1 for unknown turbo pressure status | X
|
| TP status unknown 2 | Setting 2 for an unknown turbo pressure status | X
|
| TP missing while fishing/sailing | Setting for missing turbo pressure while fishing or sailing | X
|
| RPM missing | Setting for missing RPM | X
|
| RPM missing while fishing/sailing | Setting for missing RPM while fishing or sailing | X
|
| Duty cycle missing | Setting for missing duty cycle | X
|
| Duty cycle missing while fishing/sailing | Setting for missing duty cycle during fishing or sailing | X
|
| Ship state missing 1 | Setting 1 for missing ship status | X
|
| Ship state missing 2 | Setting 2 for missing ship status | X
|
To receive an e-mail about a report, the following information must be entered:
- Duration: the length of time in which the notification takes place.
- Percentage: the percentage of registrations in which the notification at least occurred.
Note: Depending on how often a notification occurs in a certain time, it is possible that many e-mails are sent.
After closing with OK the changes are saved and used.
After closing the screen with X or Cancel, the changes are not saved and used.
Set receiver
In receiver settings you can specify who should receive the e-mails.