Monitor blackbox
Only available in: BSS and BMS
Monitoring a black box shows the current state of the black box.
Monitor a blackbox
A blackbox can be monitored one ship at a time. To open the monitor screen, right click the mouse and choose Monitor blackbox from the pop up menu. A connection with the blackbox is being attempted. If succesfull, the monitor screen will gradually fill with data.
Note: if you would like to see the communication from and to the blackbox during monitoring mode, you first have to open the Terminal screen.
Monitor screen content
The monitor screen is divided in 11 blocks, in which the following data is shown.
GPS data
The following information is displayed in the GPS data block:
| Column | Content |
|---|---|
| Date | The date in the blackbox noted as ddmmyyyy |
| Time | The time in the blackbox noted as hhmmss |
| Latitude | Latitude of the position in [00]DDMM.MMMM N/S |
| Longitude | Longitude of the position in [0]DDDMM.MMMM E/W |
| Speed | The gps speed from 0.0 - 99.9 |
| Course | The course in degrees |
| GPS quality code | The gps quality in code (0, 1, 2, 3) |
| D quality | The gps mode in code (1, 2, 3) with suffix: - -o for gps antanna open - -s for gps antenna short |
| Average speed | The average speed in knots |
Analogue inputs
Under construction
Pulse inputs
Under construction
Ship state settings
Under construction
System info
Under construction
Alarms
Under construction
Board monitoring
Under construction
Jumpers
Under construction
Status info
Under construction
Modem info
Under construction